Tight AV

DSP control panel with encoder and OLED display. Programmable control panel with encoder and OLED display, for use with the 10x10 DSP Dante

The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.

PLUG-AND-PLAY PoE DANTE INTERFACE | AU-BT2-DA from TiGHT AV allows for transmitting two channels of Bluetooth audio to your Dante network and simultaneously receiving one channel of Dante Audio. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. The AU-BT2-DA is a simple and cost-efficient solution to integrate wireless Bluetooth audio to and from a Dante network. Simply pair your device via the button on the adapter, and you are ready to play audio from your device or allow for migrating mobile calls to your Dante-enabled conference system. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2x1 audio channels -Bluetooth 5.0 support -Maximum Bluetooth LoS transmission distance up to 20m -Bluetooth paring button on front •Dante and AES67 support •24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

The AU-H101A is a small-size HDMI 2.0 audio de-embedder with 1 HDMI input, 1 HDMI output, and three different types of audio outputs. It is designed to extract audio from a HDMI signal via stereo balanced L/R audio, analog RCA, and coaxial digital audio output. It also features an HDMI equalizer to ensure full HDMI signal integrity is maintained. The AU-H101A can compensate for poor source signals or low-quality cabling at the end of a long cable run. EDID and CEC pass-through ensures that the source video is at the optimal resolution for the display and can be controlled by CEC from source. KEY FEATURES: • De-embeds analog audio and coaxial digital audio from an HDMI signal. • HDMI equalization. • Three selectable audio modes. • 4K@60Hz (4:4:4) and data rates up to 18 Gbps. • HDMI 2.0 and HDR support. • HDCP 2.2/1.4 support. • EDID and CEC pass-through.

PLUG-AND-PLAY PoE DANTE INTERFACE | AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line inputs on standard XLR female connectors -Dante and AES67 support •24-bit audio support •Supports 802.3af PoE -Dante Controller and Dante Domain Manager compatible

PLUG-AND-PLAY PoE DANTE INTERFACE | AU-X2O-DA from TiGHT AV outputs two channels of analog line level audio from your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two male XLR standard connectors, the AU-X2O-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line outputs on standard XLR male connectors •Dante and AES67 support -24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

The DA-H4A-DS is an HDMI 2.0 compatible 1x4 auto scaling HDMI distribution amplifier. It supports automatic down scaling so a 4K video input can be down scaled to an 1080p output when connecting a display that only supports resolutions up to 1080p for maximum compatibility in installations with mixed resolution displays. The DA-H4A-DS supports 4K signals up to 4K@60Hz 4:4:4 and features an easy EDID management option using dip switches on the front panel of the unit. Audio can be de-embedded from the HDMI input and outputted as balanced analog audio or digital optical SPDIF. KEY FEATURES: • Supporting resolutions up to 4K@60Hz, 4:4:4 (18 Gbps). • Supports HDR formats such as Dolby Vision. • Balanced analog and digital optical audio outputs for de-embedded audio. • Auto down scaling for maximum compatibility with mixed resolution displays. • Signal equalizer for longer HDMI runs. • Supports cascading up to 6 units. • Input supporting HDCP 2.2, outputs supporting HDCP active or passive mode. • EDID Management and CEC pass-through.

The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI. Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases. A single network cable connected to a PoE network switch allows for both power, control and Dante audio. Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording

The The HDBase-T Classroom Kit is a multi-function AV system designed to provide HDMI video switching, system control, video extension and analog audio amplification, all in one convenient kit for classrooms and meeting spaces. The system consists of an HDBaseT transmitter wall plate with two HDMI inputs, a receiver with built in audio amplification and a simple wall plate control panel. Audio and 4K video is transported over a single solid core CAT cable between the wall plate transmitter and the receiver. The wall plate control panel provides the customer with an easy to use control interface without use of programming. All power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control. The WEB GUI also supports user and administrator privileges. A user login only provides the control page that can be reached from any device with a web browser. KEY FEATURES: • Two HDMI inputs can be switched freely. • HDMI video resolution up to 4K@60Hz 4:2:0. • Extends 4K@60Hz 4:2:0 signal up to 40m and 1080p@60Hz signal up to 70m via a single CATx cable. • USB extension for interactive whiteboard connection. • HDCP 2.2. • Analog MIC/Line input. • 2 x 20 Watt@4Ohm amplifier output. • Customizable control panel, supports IR learning. • Copy and load IR and RS232 control settings. • WEB GUI control.

The EXT-AU313-TP is an audio extender set that includes one transmitter and one receiver. It is designed to extend a stereo analog audio signal up to 170 m and extend an Optical/Coax digital audio up to 290 m via a CATx cable. The EXT-AU313-TP is ideal to extend unbalanced or digital audio from a source to an audio system located far from the source. KEY FEATURES: • Three selectable audio inputs: Optical, Coax and Analog Stereo. • Audio will be outputted simultaneous to the three different outputs: Optical, Coax and Analog Stereo. • Convert audio signals from digital into analog, or analog into digital. • Supply power only at the receiver end -the transmitter is powered over the CATx cable (PoC). • The transmission distance of analog stereo audio can up to 170 m, and the digital Optical/Coax audio up to 290m over an CATx cable.

The EXT-H101L2-RX-HDBT is a fully 18G HDMI 2.0b compliant HDBaseT receiver. It receives HDMI audio, video as well as control up to 70m using a single Category 6A solid core cable (4K 60Hz 40m / 1080P 60Hz 70m) from a compatible HDBaseT transmitter. Supports HDMI 2.0b, HDR and HDCP 2.2. The EXT-H101L2-RX-HDBT provides crystal clear HDR and full bandwidth 4K video in a compact formfactor. This receiver supports automatic downscaling from 4K to 1080P without refresh rate change for easier installation when mixing 4K and 1080P displays. Support for bi-directional PoC allows for easy installation by applying power to either the transmitter or the receiver end. Features: Compact formfactor Supports HDMI 2.0b, 4K@60 4:4:4, HDR, HDCP 2.2. 4K HDMI signal extension up to 40m, and 1080p is 70m. Supports 4K to 1080p auto downscaling. Supports CEC, IR, and RS232 pass-through. Supports bi-directional 24V PoC for simplified installations.

The EXT-H101L2-TX-HDBT is a fully 18G HDMI 2.0b compliant HDBaseT transmitter. It extends HDMI audio, video as well as control up to 70m using a single Category 6A solid core cable (4K 60Hz 40m / 1080P 60Hz 70m) to a compatible HDBaseT receiver. Supports HDMI 2.0b, HDR and HDCP 2.2. The EXT-H101L2-TX-HDBT provide crystal clear HDR and full bandwidth 4K video in a compact formfactor. Support for bi-directional PoC allows for easy installation by applying power to either the transmitter or the receiver end. Features Compact formfactor Supports HDMI 2.0b, 4K@60 4:4:4, HDR, HDCP 2.2. 4K HDMI signal extension up to 40m, and 1080p is 70m. Supports CEC, IR, and RS232 pass-through. Supports bi-directional 24V PoC for simplified installations.