TiGHT AV

Visa som Rutnät Lista
Sortering

ACP-ENC-OLED | DSP Control Panel With Encoder and OLED Display from TiGHT AV

670-00030
DSP control panel with encoder and OLED display. Programmable control panel with encoder and OLED display, for use with the 10x10 DSP Dante

AU-202-DA | 2x2 Dante Interface With 2 Mic/Line Inputs and 2 Line Outputs from TiGHT AV

670-00050
The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.

AU-BT2-DA | Dante-adapter, 2X1 Bluetooth from TiGHT AV

670-00043
Plug-and-Play PoE Dante Interface | AU-BT2-DA from TiGHT AV allows for transmitting two channels of Bluetooth audio to your Dante network and simultaneously receiving one channel of Dante Audio. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. The AU-BT2-DA is a simple and cost-efficient solution to integrate wireless Bluetooth audio to and from a Dante network. Simply pair your device via the button on the adapter, and you are ready to play audio from your device or allow for migrating mobile calls to your Dante-enabled conference system. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2x1 audio channels -Bluetooth 5.0 support -Maximum Bluetooth LoS transmission distance up to 20m -Bluetooth paring button on front •Dante and AES67 support •24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

AU-BT413WP-DA-BL | 4x3 Wall Plate Dante Interface with Bluetooth, Black from TiGHT AV

670-00061
Featuring bi-directional Bluetooth audio, the interface allows you to transmit two channels of Bluetooth audio onto the Dante network, and simultaneously receive one Dante channel. The paring is as simple as pressing a button on the front panel, and you can give the unit any friendly name you like. Need more I/O? No problemo. Additional inputs and outputs are available via unbalanced RCA and TRS mini-jack connectors on the front panel. On the setup side, audio routing and control is maintained via Dante Controller and Domain Manager. A web UI handles the configuration of the device itself, with an open API for third-party control. The AU-BT413WP-DA is perfect for simple BYOD, or you could use the call bridging feature for conference calls utilizing the existing audio equipment in the room.

AU-BT413WP-DA-WH | 4x3 Wall Plate Dante Interface with Bluetooth, White from TiGHT AV

670-00060
Featuring bi-directional Bluetooth audio, the interface allows you to transmit two channels of Bluetooth audio onto the Dante network, and simultaneously receive one Dante channel. The paring is as simple as pressing a button on the front panel, and you can give the unit any friendly name you like. Need more I/O? No problemo. Additional inputs and outputs are available via unbalanced RCA and TRS mini-jack connectors on the front panel. On the setup side, audio routing and control is maintained via Dante Controller and Domain Manager. A web UI handles the configuration of the device itself, with an open API for third-party control. The AU-BT413WP-DA is perfect for simple BYOD, or you could use the call bridging feature for conference calls utilizing the existing audio equipment in the room.

AU-U22-DA | Dante-adapter, 2X2 USB-C/USB-A from TiGHT AV

670-00042
Plug-and-Play PoE Dante Interface | AU-U22-DA from TiGHT AV allows for transmitting two channels of USB audio to your Dante network and simultaneously receiving two channels of Dante Audio. It supports sample rates up to 48kHz, using Audinate’s original Dante Ultimo chip. Featuring class-compliant drivers, the AU-U22-DA allows for connecting any computer or mobile device that supports USB audio, to a Dante network without any software installation needed. Simply plug it in and get to work! The package includes two types of USB cables: Type-C to Type-C and Type-C to Type-A. Power is supplied via PoE or by USB power from connected source device.

AU-X2I-DA | Dante-adapter, 2 x XLR In from TiGHT AV

670-00041
Plug-and-Play PoE Dante Interface | AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line inputs on standard XLR female connectors -Dante and AES67 support •24-bit audio support •Supports 802.3af PoE -Dante Controller and Dante Domain Manager compatible

AU-X2IPRO-DA | Dante 2ch PRO input adapter incl input sensitivity

670-00045
AU-X2OPRO-DA är en robust och installationsvänlig "pro Dante-dongle" med två kanaler för analog ljudutgång. Enheten är baserad på Audinates ursprungliga Ultimo-chip och stöder samplingsfrekvenser upp till 96 kHz.

AU-X2O-DA | Dante-adapter, 2 x XLR Out from TiGHT AV

670-00040
Plug-and-Play PoE Dante Interface | AU-X2O-DA from TiGHT AV outputs two channels of analog line level audio from your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two male XLR standard connectors, the AU-X2O-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line outputs on standard XLR male connectors •Dante and AES67 support -24-bit audio support •Supports 802.3af PoE •Dante Controller and Dante Domain Manager compatible

AU-X2OPRO-DA | Dante 2ch PRO output adapter incl output sensitivity

670-00044
AU-X2IPRO-DA är en robust och installationsvänlig "pro Dante-dongle" med två kanaler för analog ljudingång. Enheten är baserad på Audinates ursprungliga Ultimo-chip och stöder samplingsfrekvenser upp till 96 kHz.

DC24V5A 4-PIN PSU EU/UK/US (VC-C101U-ETH (HW1), TNET-ENC-C211-DA) from TiGHT AV

670-99047
DC24V5A 4-PIN PSU EU/UK/US (VC-C101U-ETH (HW1), TNET-ENC-C211-DA)

DSP-AEC-0606 | Audio DSP with AEC, 4-In/4-Out Analog and 2x2 USB from TiGHT AV

670-00021
AUDIO DSP WITH AEC, 4-IN/4-OUT ANALOG AND 2x2 USB

DSP-AEC-1010-DA | Audio DSP With AEC, 4-In/4-Out Analog, 4-In/4-Out Dante and 2x2 USB from TiGHT AV

670-00020
The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI. Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases. A single network cable connected to a PoE network switch allows for both power, control and Dante audio. Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording

DSP-AEC-1410 | Audio DSP with AEC, 12-In/8-Out and 2x2 USB from TiGHT AV

670-00022
DSP-AEC-1410 | AUDIO DSP WITH AEC, 12-IN/8-OUT AND 2x2 USB

EDU-H201AUC-KIT (EDU-RX1, EDU-TX1, EDU-PAD1) | All-In-One HDBT Eductional Kit from TiGHT AV

B-670-02002
The The HDBase-T Classroom Kit is a multi-function AV system designed to provide HDMI video switching, system control, video extension and analog audio amplification, all in one convenient kit for classrooms and meeting spaces. The system consists of an HDBaseT transmitter wall plate with two HDMI inputs, a receiver with built in audio amplification and a simple wall plate control panel. Audio and 4K video is transported over a single solid core CAT cable between the wall plate transmitter and the receiver. The wall plate control panel provides the customer with an easy to use control interface without use of programming. All power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control. The WEB GUI also supports user and administrator privileges. A user login only provides the control page that can be reached from any device with a web browser. KEY FEATURES: • Two HDMI inputs can be switched freely. • HDMI video resolution up to 4K@60Hz 4:2:0. • Extends 4K@60Hz 4:2:0 signal up to 40m and 1080p@60Hz signal up to 70m via a single CATx cable. • USB extension for interactive whiteboard connection. • HDCP 2.2. • Analog MIC/Line input. • 2 x 20 Watt@4Ohm amplifier output. • Customizable control panel, supports IR learning. • Copy and load IR and RS232 control settings. • WEB GUI control.

EDU-H201AUC-KIT (EDU-RX1, EDU-TX1, EDU-PAD1) | All-In-One HDBT Eductional Kit from TiGHT AV

670-02002
The The HDBase-T Classroom Kit is a multi-function AV system designed to provide HDMI video switching, system control, video extension and analog audio amplification, all in one convenient kit for classrooms and meeting spaces. The system consists of an HDBaseT transmitter wall plate with two HDMI inputs, a receiver with built in audio amplification and a simple wall plate control panel. Audio and 4K video is transported over a single solid core CAT cable between the wall plate transmitter and the receiver. The wall plate control panel provides the customer with an easy to use control interface without use of programming. All power needed for the system is provided by the receiver. Additionally, the receiver features a built-in web GUI for control. The WEB GUI also supports user and administrator privileges. A user login only provides the control page that can be reached from any device with a web browser. KEY FEATURES: • Two HDMI inputs can be switched freely. • HDMI video resolution up to 4K@60Hz 4:2:0. • Extends 4K@60Hz 4:2:0 signal up to 40m and 1080p@60Hz signal up to 70m via a single CATx cable. • USB extension for interactive whiteboard connection. • HDCP 2.2. • Analog MIC/Line input. • 2 x 20 Watt@4Ohm amplifier output. • Customizable control panel, supports IR learning. • Copy and load IR and RS232 control settings. • WEB GUI control.
Close
Filter by Clear All
Filter by
Attribut
  • Active Optical Cable
  • Kabeltyp
  • Kontakt
  • Storlek
  • 70V/100V
  • Färg
  • Aktiv/passiv
  • Längd
Filters
Sort
display