ZC3 | fjärrpanel 4st source/preset

ZC 3 Wall Mounted, Program Selecter Zone Controller
Loading...
Tillverkare: DBX
Artikelnr: 761-00002
Tillverkarens artikelnr: DBXZC3V-EU

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.

The remote device shall provide programmable rotary switch program selection for the dbx® DriveRack® 220i and 260 devices. The remote device shall also provide rotary switch programmable source selection, page assignment, or scene selection for the dbx ZonePRO™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-3-EU remote controller.

The Zone Controllers offer extended utility to the DriveRack® and ZonePRO™ families. The nine Zone Controllers use analog DC voltage to provide logic control ranging from zone source selection, volume and muting, to program or scene selection and fire safety muting. Wired with readily available and affordable CAT5 cable with universally accepted RJ-45 connectors at distances up to 1000 ft, the ZC Zone Controllers offer simple yet elegant solutions to the contractor. The ZC-3 can function as a program selector for the DriveRack 260 and 220i; in addition it can be used for as a source selector, page steering control, or a scene selector for the ZonePRO products.

The remote device shall provide programmable rotary switch program selection for the dbx® DriveRack® 220i and 260 devices. The remote device shall also provide rotary switch programmable source selection, page assignment, or scene selection for the dbx ZonePRO™ devices. The remote device shall have DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors. The device shall be a dbx ZC-3-EU remote controller.

*
*
*
Kunder som köpte denna köpte också

ZC1 | fjärrpanel volym

761-00000
ZC 1 Wall Mounted, Programmable Zone Controller

AY9 adapter | 3,5mm jack - 2x XLR M, 1m

334-02761
Y Cables: are used to split signals from stereo plugs into left and right channels.

AU-X2I-DA | Dante-adapter, 2 x XLR In from TiGHT AV

670-00041
Plug-and-Play PoE Dante Interface | AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line inputs on standard XLR female connectors -Dante and AES67 support •24-bit audio support •Supports 802.3af PoE -Dante Controller and Dante Domain Manager compatible

Control 25-1L Lav ohm, vit

800-00141
Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker
Filters
Sort
display