AU-X2I-DA | Dante-adapter, 2 x XLR In from TiGHT AV

Vi ber om ursäkt! Den här produkten är inte tillgänglig längre.

Plug-and-Play PoE Dante Interface | AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip. Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network. PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector. KEY FEATURES: •Plug and Play •2 x line inputs on standard XLR female connectors -Dante and AES67 support •24-bit audio support •Supports 802.3af PoE -Dante Controller and Dante Domain Manager compatible

Tillverkare: TiGHT AV

Artikelnr: 670-00041

Tillverkarens artikelnr: AU-X2I-DA

Läs mer hos vår leverantör:

Manufacturer URL	https://www.tightav.com/dante-2-channel-xlr-input-adapter

AU-X2I-DA from TiGHT AV inputs two channels of analog line level audio to your Dante network. It supports sample rates up to 96kHz, using Audinate’s original Dante Ultimo chip.

Featuring two female XLR standard connectors, the AU-X2I-DA is a simple and cost-efficient solution to connect analog equipment to a Dante network.

PoE support allows for a simplified installation via a PoE-capable network switch or from a separate PoE injector.

KEY FEATURES:

-Plug and Play
-2 x line inputs on standard XLR female connectors
-Dante and AES67 support
-24-bit audio support
-Supports 802.3af PoE
-Dante Controller and Dante Domain Manager compatible

Beskrivning
Kontakta oss
Bilagor

-Plug and Play
-2 x line inputs on standard XLR female connectors
-Dante and AES67 support
-24-bit audio support
-Supports 802.3af PoE
-Dante Controller and Dante Domain Manager compatible

Namn *

Din e-post *

Förfrågan *

Product Files

Kunder som köpte denna köpte också

AY9 adapter | 3,5mm jack - 2x XLR M, 1m

334-02761

Y Cables: are used to split signals from stereo plugs into left and right channels.

PRX412M | 2-vägs topp/monitor, 12"/1.5", 90X50

800-02000

12" two-way stage monitor or front of house passive speaker system; 1200 Watt peak power handling , 126dB Maximum SPL , 8 ohms. DuraFlex™-covered 18mm plywood enclosure, 16 gauge cloth-backed steel grille, dual 36 mm pole sockets, non-skid rubber feet. 12 M10 suspension points. Net Weight 17.5kg (38 lbs.)

PRX418S | 18" Subbas

800-02004

Compact 18" portable subwoofer system; 35Hz Frequency Range, 2400 watt peak power handling, 130dB Max SPL, cloth-backed steel grille M20 pole socket, non-skid rubber feet, Net Weight 33.5kg (74 lbs.)

DSP-AEC-1010-DA | Audio DSP With AEC, 4-In/4-Out Analog, 4-In/4-Out Dante and 2x2 USB from TiGHT AV

670-00020

The DSP-AEC-1010-DA is an audio signal processing unit with analog and Dante interface, as well as a USB for computer audio. The unit is configured and controlled from a Windows application that presents an easy to use GUI. Powerful processing with eq, dynamics, mixing and matrix combined with advanced acoustic echo cancellation (AEC) makes this unit suitable for a wide range of use cases. A single network cable connected to a PoE network switch allows for both power, control and Dante audio. Analog audio inputs supports both microphone and line level sources. Phantom power is selectable individually for each channel. USB connection to host computer works as a sound card for easy computer audio connectivity for both playback and recording

EON715 | Aktiv, 15"+ 1", 1300W, blåtand, svart

800-00032

15-inch Powered PA Speaker with Bluetooth

AU-202-DA | 2x2 Dante Interface With 2 Mic/Line Inputs and 2 Line Outputs from TiGHT AV

670-00050

The 2x2 Dante is a network audio interface allowing users to integrate up to 2x2 audio channels of Dante audio into networked AV systems. Each input features a microphone preamplifier and 48V phantom power option. The 2x2 Dante features PoE power capability and local power. A small form factor and included mounting ears makes it easy to add Dante connectivity wherever it is needed. It can be close to the audio source or sink to eliminate the need for costly and interference-prone analog wiring.